亚洲欧美日韩精品专区

Looking for partners to create wealth together 400-9155-118
Product Center Products
Current location: Home Page Product Center
Universal waterproof coating L-106
Universal waterproof coating L-106
Model: L-106
Browse: Recently One thousand two hundred and eighty-one Person view
product details

       Product introduction
The general purpose waterproofing coating is a two component waterborne coating made of imported modified polyacrylic acid emulsion and various additives. The main technical guidance of the product is to reach the same level of products in developed countries such as Europe, Germany, the United States, Japan and other developed countries.
        Product characteristics
Waterborne coatings are non-toxic, harmless and pollution-free. They are environmentally friendly coatings with high tensile strength, water resistance and weather resistance. It can be constructed and adhered firmly on the wet base. And anti ultraviolet insulation.
      Scope of application
It is most suitable for waterproofing, impervious and moistureproof works of roofing, bathroom and external walls.
It can be used for underground works, as well as for waterproof coating on tunnels and caverns.
Waterproofing works of Luqiao, pool and water conservancy projects
        Main points of construction
At the base, all sides of the yin yang angle and the pipe root should be circular. The diameter of the Yin angle should be greater than 50mm, and the diameter of yang angle should be greater than 10mm.
Waterproofing layer, which can be coated with waterproof structure independently, and can also be used to reinforce carcass reinforced materials according to actual engineering conditions or design requirements. The thickness of each coating should be less than 1.5mm. The thickness of a fortification shall not be less than 2mm, the underground works shall not be less than 2mm, and the lavatory rooms shall be not less than 1.5mm.
        Matters needing attention in construction
When the product is built, the air temperature must be higher than 5 degrees. It is not suitable to be constructed in rainy weather or under clear water at the grass-roots level.
        Main points of construction
The grass-roots surface should be leveled, solid, without sharp acute angle, floating dust and bright water, and the waterproofing nodes should be handled according to the design requirements. The oil pollution must be clear and clean, and the damaged areas should be leveled.
Matching method of paint: Material: Powder: water 1:3.5: (0-0.1) first pour the liquid into the mixing barrel, stir slowly and add the powder at the same time. After mixing thoroughly, it will be used as a paste without agglomeration.
Details of the additional waterproof layer - in accordance with the design requirements in the grooves embedded in filling materials, in the Yin and Yang, root and other details should be multiple times (2-4 times) to brush waterproof paint, underground should be covered with a layer of matrix reinforcement.
The construction of large waterproof layer -- waterproof coating should be coated several times, and should be finished at least four sides. The coating time is 8h per time, and the winter coating should be extended. The thickness of each coating is 0.4-0.5mm.
      The paint consumption is about 0.8kg/m2, and the vertical construction is suitable for water without adding water or less water, so as to avoid the paint flowing, so that the thickness of the facade is not easy to reach the design thickness. At the same time, the overburden of the Yin Yang corner is too thick to produce cracks. When the carcass reinforcement material is added, the carcass should be paved without wrinkles, and the lap is not less than 100mm.
After completion of acceptance, the waterproof layer should be constructed according to the design requirements.
        The product is packaged as:
10KG/ barrels, 20KG/ barrels

Other products
400-9155-118