(referred to as "solid") is a new generation of polymer polymerized environmental protection products. It is made of a new type of polymer colloid in Germany. It is composed of many processes. It has strong permeability to the ground. The polymer can permeate the cement floor and firmly block the loose particles on the cement floor, so that the ground can form a tightly integrated body, which is convenient for the close combination of decorative materials and the ground.
Scope of application
Effective solution to cement smooth base, enhance roughness, prevent floor hollowing phenomenon, solve floor cracks and flashes, solve dust on the floor, moisture-proof and mildew proof, increase floor life and clean indoor air.
1. Interface treatment at the grassroots level: remove the oily dirt and loose parts on the surface of the base.
2. Use wet water to wet the ground ahead of time. 3, dilute the water that is solid to 0-50%, dilute it with rollers or brushes evenly, and roll it over 1 to 2 times in the treated area. After coating for 3-4 hours, the tiles, floors and artesian equality can be laid.
4, hair treatment: cement and ground solid stirring evenly paste paste, with roller or spatula evenly coated on the base, to enhance the roughness of the base, increase the cement mortar to the grass-roots adhesion.
administration and dosage
Diluted with water, 10 kg / kg per kilogram (depending on base flatness and water absorption).
Matters needing attention
1. The construction temperature is suitable for 5 degree C-35 degrees C, and the theoretical drying time is 6-8 hours.
2. It is strictly prohibited to mix with other preparations.
3. The product is stored in ventilated, dry and light resistant storage for 1 years.
4, any base surface must be tested in a small area before large area construction.
Storage and transportation
This product is stored in a cool and ventilated place at 5~ 40 degree C, and it is strictly prohibited from exposure to sunlight and freezing. The product's shelf life is one year under the storage and transportation conditions that meet the standard requirements. Products are non-toxic and non inflammable, and storage and transportation can be handled according to the rules of non dangerous goods.