亚洲欧美日韩精品专区

Looking for partners to create wealth together 400-9155-118
Product Center Products
Current location: Home Page Product Center
Composite waterproof coating (emulsion)
Composite waterproof coating (emulsion)
Model:
Browse: Recently One thousand seven hundred and nineteen Person view
product details

       main features
1. Wet surface construction; coating is tough and high strength.
2, adding pigment can be made into color decorative layer.
3, non-toxic, tasteless, which can be used for waterproofing of edible pools.
4. It is applicable to waterproof, facade, slope and top surface of exterior walls and inclined roofs, and can be firmly bonded to all kinds of outer materials such as base and decorative tiles, roofing tiles and cement mortar.
5, high temperature resistance (140 C), especially for road and bridge waterproofing.
6, adjust the mix ratio, can produce ceramic tile bonding material and sealing material.
        Scope of application
1. Roofing waterproof for industrial and civil buildings.
2, toilet bath, kitchen waterproof, moisture-proof engineering.
3, wall, basement, swimming pool, tank waterproof.
        Product use
It is used for waterproofing, seepage prevention and moistureproof in basement, bathroom, swimming pool, drinking water project and various irregular parts.
        Material characteristics
It can be directly constructed on the base surface of wet or dry materials.
It is non-toxic, tasteless and pollution-free.
The construction is safe, simple and short construction period.
The coating has high toughness, high strength, good elasticity, weatherability and excellent durability.
Good waterproof effect and strong bonding with the base.
Performance index: "JC/T894-2001"
        Scope of application
It is suitable for kitchen, bathroom, bathroom and so on.
Waterproofing and seepage prevention for floors, balconies, roof terraces and walls.
Damp proof works for wooden flooring.
Waterproof and seepage control for basement, subway and tunnel
        Construction method
1, the base surface must be smooth, strong, clean, and clear water. The uneven place must be leveled first, and the yin yang angle should be made into a circular arc angle.
2, according to the prescribed proportion of material, if need to add water, first added to the liquid material, stirring with the mixer side to add. Stir well until the material does not contain pellets (stirring time more than 3 minutes, without hand stirring). The ratio of the weight of the backing coating: liquid material: Powder: water = (I) 10:10:10, (II) 10:10:10, the dosage is about 0.5kg/ 0.5kg/; the lower, middle and upper coatings are weighed according to the weight ratio: liquid: Powder: water = (I) 10:7:0-1, (II) 10:10:0-2, each layer is about 1kg/. The upper coating can be added with pigment to form a color waterproof layer. In the prescribed water addition area, the slope, roof or facade construction should be added without additional or less construction. The dosage is 3 to 4kg per square meter and the construction thickness is 1.5 to 2mm.
3, select the appropriate tools (roller, brush, or scraper, etc.), according to the corresponding method, according to the bottom layer, the lower layer to the middle level to the upper order.
4, mortar protection layer or decorative layer construction must be completed in 2 days after completion of waterproof layer. In order to facilitate construction, mortar should be sprinkled with clean medium and coarse sand immediately after the final coating. If liquid material is used: powder =10:20-30 is putty, it can also be used as bonding and sealing material.

Other products
400-9155-118